Strip Brush Introduction

Unimade Industry Co., Limited, is an industrial clean brushes supplier in China. Strip brush is one of our products. You can visit our website to learn more: www.umdbrush.com

Strip brushes, commonly used industrial equipment, are generally used to block moving doors and windows, smooth doors, automatic doors, elevator dust, to prevent dust from entering the interior.

Brush classification:
Strip brushes can be classified into sealing brush, iron brush, stainless steel strip brush, horse hair brush, stainless steel wire brush, corrugated nylon wire brush, brick brush, nylon brush and so on.
Strip brushes are widely used in various types of automatic doors, such as moving doors and windows, revolving doors, smooth doors, elevators on the seal and to block dust, prevent dust from entering the interior, and large industrial machinery cleaning, glass edging machine retaining water, agricultural harvester internal seals, wind turbine compartment cover seals and car wash brush, etc. Strip brushes are indispensable gadgets for modern industrial equipment
The thickness of the brush strip is: 3, 4, 5, 6, 7, 8, 10mm, etc. The thickness specification of the stainless steel strip is: 3, 4, 5, 6, 7 and 8mm. The brush strip can be subjected to special treatment such as bending !

Need to pay attention to the following 4 questions for the strip brush cleaning:
1. Never clean the brush bristles against the brush.
2. After the brush is cleaned, gently press it with a finger or a cotton pad to let the water drain out. However, remember not to twist the bristles. Otherwise, the bristles of the brush will be damaged, and the structure of the bristles will be loose, resulting in hair loss.
3. Brush After brushing, hang the brush and allow the bristles to dry down.
4. To dry naturally, do not use a hair dryer to dry, let alone dry in the sun, otherwise it may hurt the brush bristles material.